Diastereoselective inter- and intramolecular pinacol coupling of aldehydes promoted by monomeric titanocene(II) complex Cp(2)TiPh

A monomeric titanocene(III) derivative, Cp(2)TiPh, effectively promoted the pinacol coupling of both an aromatic aldehyde, benzaldehyde, and an aliphatic aldehyde, 3-phenylpropionaldehyde. The same reactive complex was successfully generated by a catalytic amount of a precursor, Cp(2)Ti(Ph)Cl, and its stoichiometric amount of Zn. The Cp(2)TiPh-catalyzed pinacol coupling of benzaldehyde derivatives and aliphatic aldehydes afforded the corresponding 1,2-diols in high yields with moderate to good threo-selectivity. On the other hand, Cp(2)TiPh-catalyzed pinacol cyclization of dials gave cyclic 1,2-diols with excellent diastereoselectivity. The extension of this protocol to chiral dials demonstrated that the phenyltitanium complex catalytically transmitted an axial chirality or a central chirality of the starting dials to the central chirality of the resultant 1,2-diols.     

The synthesis of isoquinoline alkaloid and its related compounds using alanine derivatives as chiral auxiliaries

Chiral 1-substituted isoquinoline derivatives, which were obtained by the reaction using alanine derivatives as chiral auxiliaries, were transformed to (S)-2,3,9,10,11-pentamethoxyhomoprotoberberine (7) and a synthetic intermediate for O-methylkreysigine (9) in good yields and high stereoselectivity. The corresponding chiral allyl derivative of isoquinoline was transformed to a pyrrolidinoisoquinoline (16) in a highly enantioselective manner.     

Stability and vibrational spectra of toroidal isomers of C 240

To study the thermodynamic and mechanical stability of toroidal isomers of C ₂₄₀, we use a semi-empirical tight-binding theory and calculate their electronic structure, cohesive energy and vibrational spectra within the harmonic approximation. From these, we deduce their free energy at temperatures up to 1500K. The results are also compared to the isomer with icosahedral symmetry. Finally, we discuss within this approach, their stability and abundance.     

Dosimetry of fast neutrons in 1W nuclear reactor with plastic nuclear-track detectors

A nuclear reactor at Kinki University is operated at the maximum of 1W. It produces fission neutrons as much as gamma-rays. To facilitate its use for neutron radiobiology, fast neutrons inside the reactor were measured with nuclear-track detectors TS 16 N and a pair of ion chambers. The angular dependence of TS 16 N response, an anisotropy of fast neutron fluxes in the reactor and misuse of the kerma factor assumed for radiation protection business are the major causes of discrepancy is measured doses by the two methods. Correction factors for the three causes are proposed. After correction, neutron doses estimated with TS 16 N and chambers agree within 5%. The dose-rate at the reactor's center is about 20 tissue-cGy/h. This is the first in situ dosimetry of fast neutrons in a reactor with track detectors attached to biologic samples. Our routine usage has demonstrated that, if used with caution, TS 16 N elements are handy, reliable monitors for fast neutron dosimetry as they are insensitive to contaminated gamma-rays and small enough to be attached to biologic samples.     

Radical trifluoromethylation of ketone Li enolates

It has generally been believed that highly basic Li enolates cannot be applied as substrates for radical trifluoromethylation due to defluorination of the α-CF₃ product. However, Li enolates can be in fact employed for radical trifluoromethylation. Moreover, the reaction is extremely fast and the minimum reaction time is only ∼1 s.     

Non-glutamate type pyrrolo[2,3-d]pyrimidine antifolates. III. Synthesis and biological properties of N(omega)-masked ornithine analogs

The glutamic acid moiety of N-[4-[3-(2,4-diamino-7H-pyrrolo[2,3-d]pyrimidin-5-yl)propyl]benzoyl]-L-g lutamic acid (1b, TNP-351) and the related compound (1a), was replaced with various N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-2,omega-diaminoalkanoic acids, and the inhibitory effects of the resulting products (9, 11, 14, 18, 21, 23, 25, 30, 36) on dihydrofolate reductase (DHFR), the growth of murine fibrosarcoma Meth A cells, and methotrexate-resistant human CCRF-CEM cells, were examined. Compounds (9a-f) acylated with a hemiphthaloyl group were efficiently synthesized by coupling pyrrolo[2,3-d]pyrimidine carboxylic acids (7a,b) and N(omega)-phthaloyl 2,omega-diaminoalkanoic acid methyl esters (6a-c) and subsequent hydrolysis. The other N(omega)-acyl- and sulfonyl-ornithine analogs (21, 23, 25) were synthesized by acylation of free amino intermediates (19a,b) derived from tert-butoxycarbonyl-ornithine analogs (17a,b). A free ornithine analog (18) did not strongly inhibit Meth A cell growth, whereas all N(omega)-acyl-, sulfonyl-, carbamoyl- and aryl-ornithine analogs (9, 11, 21, 23, 25, 30, 36) exhibited much more potent inhibitory activities against both DHFR and Meth A cell growth. In particular, compounds 9c, 21k and 36a also showed remarkable growth-inhibitory activities against methotrexate-resistant CCRF-CEM cells. These results demonstrate that the potent inhibitory activities of N(omega)-masked ornithine analogs against the growth of Meth A cells and methotrexate-resistant CCRF-CEM cells, results from effective uptake via reduced folate carrier and their potent DHFR inhibition.     

Self-assembly patterning of colloidal crystals constructed from opal structure or NaCl structure

We developed a novel self-assembly process to fabricate an orderly array of particle wires constructed from a close-packed colloidal crystal without preparation of patterned templates. A substrate was immersed vertically into a SiO2 colloidal solution, and the liquid surface moved downward upon evaporation of solution. Particles formed a mono-/multiparticle layer, which was cut by the periodic drop-off of solution. The orderly array of particle wires was successfully fabricated, showing the suitability of the self-assembly process for the fabrication of nano-/microstructures constructed from nano-/microparticles or blocks. The mechanism of the assembly process and control of thickness, width, and interval of particle wires were further discussed. Moreover, an array of particle wires constructed not from close-packed face-centered cubic (or hexagonal close packed) structure but from two kinds of particles was realized to fabricate an array of particle wires with NaCl structure by this self-assembly process.     

A simple and simultaneous determination of acyclovir and ganciclovir in human plasma by high-performance liquid chromatography

A simple high-performance liquid chromatographic method was developed for the simultaneous determination of the therapeutic levels of acyclovir and ganciclovir in human plasma. After precipitation of plasma proteins with 6% perchloric acid, acyclovir and ganciclovir were simultaneously determined by reversed-phase chromatography with spectophotometric detection at 254 nm. The peak heights for acyclovir and ganciclovir were linearly related to their concentrations ranging from 0.063 to 2.080 micro g/mL. The recovery was 100.48-102.84% for acyclovir and 99.26-103.07% for ganciclovir. The intra- and inter-day relative standard deviation values were in the range 0.186-8.703% for acyclovir and 0.137-6.424% for ganciclovir. The detection limits for both compounds were 0.01 micro g/mL determined as the signal-to-noise ratio of 3. The present method is applicable to therapeutic monitoring during antiviral medication.     

Reversible color changes in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide nanosheets

The present study is an investigation of a reversible thermal color change induced in lamella hybrids of poly(diacetylenecarboxylates) incorporated in layered double hydroxide (LDH) nanosheets. These poly-[m,n]/LDH hybrids prepared by the photo- or gamma-ray-induced polymerization of diacetylenecarboxylates, i.e., CH(3)(CH(2))(m)()(-)(1)CC-CC(CH(2))(n)()(-)(1)CO(2)(-) (mono-[m,n]), and intercalated in LDH lamella sheets, were observed to develop colors ranging from yellow to blue. The change in color was found to depend greatly on the alkyl carbon numbers of the mono-[m,n] (m,n = 10,11; 5,11; 10,5; 16,1) values. Moreover, the conformational alignment of the mono-[m,n] within the LDH was observed to be a crucial factor in color development, which was greatly affected by the intercalation degrees and extent of poly(ene-yne) linkage elongation of the polymers. For the poly-[m,n]/LDH hybrids investigated, a reversible color change was found to occur repeatedly and remarkably for the poly-[10,11]/LDH hybrid. This color change occurred at temperatures between ca. 20 and 80 degrees C back and forth from purple red to bright orange, in stark contrast to the irreversible color change for poly-[10,11] without LDH. Moreover, DSC and Raman spectroscopic studies of the LDH hybrids showed that the thermochromic temperature corresponded to the phase transition temperature of 80 degrees C. XRD analysis also indicated that the poly-[m,n]/LDH hybrid could retain its lamella structure during such thermochromic color changes, enabling conformational recovery in the polymer chains by a cooling down of the hybrids to temperatures lower than the transition temperature, while the nonhybrid poly-[10,11] powders exhibited an irreversible color change at 60 degrees C, above which the polymer powder turned amorphous.     

Biomimetic oxidation of alcohols by coenzyme PQQ-trimethyl ester

Oxidation of alcohols to corresponding carbonyl compounds by coenzyme PQQ-trimethyl ester was performed in the presence of aluminum t-butoxide or aluminum chloride under anaerobic conditions. Reduced PQQTME (PQQTMEH₂) was obtained by acidification of an aluminum complex of reduced PQQTME which was isolated in the reaction.